QBCT

9565 Imer 28in Brick/Block Blade

Batteryimages — Fri, 12 Mar 2010 01:09:02 +0000

Price : $499.99

Imer 28 Masonry Brick and Block Blade

28 Blade allows for cutting 8 and 10 block in a single pass

Imer diamond blades represent the best in diamond blade manufacturing, the recipe of Korean steel and G.E. Diamonds mean these blades outperform the competition

Tagged as Concrete & Masonry Tools, Diamond Blades, Masonry Diamond Blades

9564 Armeg PTC2 1-3/8in Diamond Crown Bit Sta

Batteryimages — Fri, 12 Mar 2010 01:09:02 +0000

9564 Armeg PTC2 1-3/8in Diamond Crown Bit Sta

Price : $174.99
Armeg PTC 1-3/8in Diamond Crown Bit Starter Kit

This handy starter kit comes with everything needed to complete the drilling of porcelain tile
Starter kits include 1-3/8 PTC diamond crown bit, PTC carbide 1/4 pilot drill, 1/4 professional masonry drill, water fed adaptor, water feed tube and nozzle, & water feed clamp.

Tagged as Shop by Brand, Armeg

9563 EdgeRight Wet or Dry Profiler

Batteryimages — Fri, 12 Mar 2010 01:09:02 +0000

9563 EdgeRight Wet or Dry Profiler

Price : $0
Edgeright Dry Profiler

Dry 3/8 fine (200 grit) or coarse and 1/4 coarse round-over profilers for granite, engineered stone and porcelain.
All 7mm radius.
Long-life brazed diamond cutting surface.
Dry cutting wheel with a 5/8-11 female
Nylon guide slides along the surface to make this tool nearly Goof-proof
Can be used wet with external water supply
Maximum 4500 Rpm recommended
Guide Bearing: Bottom: Stainless Steel, top: no-scratch Polymer.
Water NOT required. Profiler is channeled for water and can be used wet or dry.

Features

Bullnose any size tile or slab.
Portable fits most polishers.
Industrial strength Stainless Steel withstands job site abuse.
No-Scratch top bearing
Long-life brazed diamond cutting surface.
In conjunction with the EdgeRight-« Bullnosing Bench, an operator with little or no fabrication experience can bullnose tile like a PRO!
Tagged as Tile & Stone Tools, Polishing & Profiling Equipment, Profile & Cup Wheels

9562 PTC2 Diamond Crown Accessories

Batteryimages — Fri, 12 Mar 2010 01:09:02 +0000

9562 PTC2 Diamond Crown Accessories

Price : $0
PTC2 Diamond Crown Accessories.

Water Feed Adapter

Drive adapter incorporate a water delivery system for crown cooling.
Small diameter water adapter use with 3/16 to 3/8 crowns.
Large diameter water adapter use with 1/2 to 4-1/2 crowns, pilot hole must be drilled with 1/4 PTC carbide bit.

Water Sprayer

Pressure pump sprayer for water cooling of the PTC carbide bit and PTC2 diamond crown.
Capacity: 1 gallon.

Water Feed Clamp Kit

Clamp attach the nozzle directly to the drill for a constant flow of water to the cutting edge freeing both hands to control the drill.
Kit includes: depth stop, water feed connector, water feed tube and clamp.
Use the water feed tube adapter with the water Feed either with the PTC2 Diamond Crowns or PTC carbide bits.

Piloting Guide Pads.

PTC Diamond piloting guide pad ensures non slip start up of the 3/16 to 3/8 (5-10mm) PTC Diamond crowns.

Tagged as Shop by Brand, Armeg

9561 Armeg PTC2 Diamond Porcelain Crown Bit

Batteryimages — Fri, 12 Mar 2010 01:09:02 +0000

9561 Armeg PTC2 Diamond Porcelain Crown Bit

Price : $0
Armeg PTC2 Diamond Porcelain Crown Bit.

The solution to durability and extended life: Thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with some short life diamond grit alternatives.

Thin wall, continuous diamond crowns for fast, efficient cutting and extended life.
Max operating speed, is between 700 and 900 Rpm.
Perfect combination of diamond grade and precision manufacturing, provides exceptional products strength and greatly enhanced tool life.
Drive adapter incorporate a water delivery system for crown cooling.
Anchor and fasten holes for small plugs and anchors.
Drill water pipes, shower heads & faucets, drain pipes & toilet drain pipe.
Bits must be used with water adapters small diameter use with 3/16 to 3/8 crowns large diameter water adapter use with 1/2 to 4-1/2 crowns
Made in the UK.

Features:

3/16 Continuous diamond crown matrix expose a new cutting surface while drilling for faster cuts and longer life.
Unique profile produces very accurate and neat holes with minimal entry and exit damage.
Specially designed diamond crown construction reduces drag and allows for easy tile slug removal.
Life expectancy of the Diamond Crown is 350+ holes in Porcelain tile with proper usage.
Holes can be drilled in less than 2 minutes.
The PTC2 Diamond Crown must be used with a PTC water feed adapter.
Maximum depth of cut: 3/4.
Water swivel sold separately, see item 9562

Tagged as Shop by Brand, Armeg

9560 Imer Masonry 700 Saw

Batteryimages — Thu, 11 Mar 2010 23:35:16 +0000

9560 Imer Masonry 700 Saw

Price : $0
Imer Masonry 700 28
Stone, Masonry and Precast Saw

Cutting Blocks just got a lot easier!
The Masonry 700 allows the operator to cut 8 and 10 blocks in a single pass without the added hassle and effort of a foot pedal.
The powerful 7.5 hp. electric motor combined with the 28 blade delivers 11 of cutting depth.
Whip it through blocks, pavers, fieldstone, and pre-cast concrete with ease.
The frame and cutting tray are hand fabricated heavy duty steel, while the ergonomic design allows the operator to load up the saw with a lot less effort than our competitorsGÇÖ saws.
Cut GÇ£mucho m+ásGÇ¥ material in a dayGÇª Guaranteed!
Should it be necessary to make a plunge cut just grab the control handle and ease the blade into the material.
The cutting head pivots on sealed bearings, making plunge cuts is smooth and controlled.
Blade Diameter 28, arbor 1
Max. cutting length 18 / (w/plunge cut) 27
Max. cutting depth 11
Motor rating 7.5 h.p. 220 3++
Blade speed 1700 r.p.m.
Weight (crated) 440 lbs. (495 lbs.)
Water pan capacity 24 gals. with self-Priming centrifugal pump flow 3 g.p.m.
Length 60 x Width 33 x Height 62

Tagged as Concrete & Masonry Tools, Concrete & Masonry Saws, Masonry Block Saws

9559 Dewalt 4pcs Wet Porcelain drill bit, 1/4

Batteryimages — Thu, 11 Mar 2010 23:35:16 +0000

9559 Dewalt 4pcs Wet Porcelain drill bit, 1/4

Price : $59.99
DeWalt 4pcs Wet Porcelain Drill Bits Kit

4 diamond bits +ÿ 1/4(6mm), 5/16 (8mm), 3/8 (10mm), 3/4 (18mm).
Plastic carrying case included with kit.
Diamond welded tip for greater life & durability.
Tested by our staff to drill more than 20 holes in hard porcelain.
Reverse spiral thread delivers continuous water feed critical for life & speed.
Core ejection slot removes plug for repetitious holes
Use wet only

Tagged as Tile & Stone Tools, Drilling Tile & Stone, Diamond Hole Saws & Core Bits

9558 Dam-It Drilling Guide

Batteryimages — Thu, 11 Mar 2010 23:35:16 +0000

9558 Dam-It Drilling Guide

Price : $69.99
Dam-It Benefits & Features:

For coring holes through granite, marble & stone.
The system helps stabilize the drill from walking and scratching the material while maintaining the water.

17 Piece Kit Includes:

Water Dam Centering Rings: 3GÇ¥ & 5GÇ¥ diameter.
Drill Bit Size Rings: 1/4GÇ¥, 3/8GÇ¥, 1/2GÇ¥, 5/8GÇ¥, 3/4GÇ¥, 7/8GÇ¥, 1GÇ¥, 1-1/8GÇ¥, 1-1/4GÇ¥, 1-3/8GÇ¥, 1-1/2GÇ¥, 1-5/8GÇ¥, 1-3/4GÇ¥ & 2GÇ¥
Dam-It is a self-lubricating drill guide system that produces clean and accurate holes with ease every time.
Millions of dollars are spent every year correcting small preventable mistakes in the stone and tile industry.
This cost effective drill guide system will prevent run-away etching, burning, and cracking upon break through, protecting your finished product.
One of Dam-It greatest features is its ability to transform a multi-person project into a single-user task.
Anyone can drill a clean and precise hole every time.<pDrill a perfect hole!

Tagged as Tile & Stone Tools, Drilling Tile & Stone, Guides & Accessories

9557 Target By Husqvarna Tilematic TS250 X3SS

Batteryimages — Thu, 11 Mar 2010 23:35:16 +0000

9557 Target By Husqvarna Tilematic TS250 X3SS

Price : $1219.97
Target by Husqvarna Tilematic TS 250X3SS Wet Tile Saw W/ Stainless Steel Water Pan Features

Free shipping from the Husqvarna factory warehouse

Free 3 Pcs cutting package (a $49.99 value).

Free Folding stand (a $84.99 value).

New Features of the TX 250X3 model

TX 250X3 allow for 18 diagonal-cutting capacity
Stainless Steel Water Pan
New blade-shaft lock to make blade removal easier
New, 50% larger conveyor cart to better support larger tile
Has ability to make spring-assisted plunge cuts
TX 250X3 features a cam adjustment to aid belt tensioning

Baldor High Torque Motor

Features a 1-1/2 hp Baldor single continuous-duty motor that is totally enclosed fan cooled (T.E.F.C.)
Motor is high torque for production sawing capacity and is both UL and CSA rated and backed by the manufacturer-¦s limited, one-year warranty
Utilizes a dual capacitor for increased power efficiency in low voltage starting conditions

Drive Belts and Cutting Head Adjustment

Premium 6-grove poly V-belts are smoother running with less vibration, reducing belt slippage and transmitting more power to the shaft
Belt is totally enclosed by the guard for operator safety and protection of components
Cutting head can be adjusted to various heights and locked into position for use with 8 or 10 blades
The three holes on support arm allow for fast, easy adjustment for different size blades (6, 8 and 10)

Water Pump and Hoses

Pump is epoxy-coated and lifetime lubricated
Water hoses connect easily to the outside of the blade guard

Tagged as Tile & Stone Tools, Tile Saws & Stone Saws, 20in to 25in Tile Saws

9556 QEP 21660 Variable Speed Mixer With Padd

Batteryimages — Thu, 11 Mar 2010 23:35:16 +0000

9556 QEP 21660 Variable Speed Mixer With Padd

Price : $129.99
QEP Power Mixer With Paddle

This lightweight, impact resistant power mixer was designed with the professional installer in mind.

Variable speed finger tip control dial prevents splashing at start up
Powerful high torque 2 speed motor.
10 Amps, 1100 Watts, 110 Volts.
1st gear 180-460 Rpm
2nd gear 300-700 Rpm
variable speed switch reduces air bubbles when mixing thinset and grout
M14 threaded connection
Durable motor housing is lightweight and impact resistant
Ergonomic handle grip reduces fatigue and minimizes strain
Weight 13-1/2 lbs.

Tagged as Tile & Stone Tools, Grout Mixers, Mixers & Drills